Warning: session_start(): Cannot start session when headers already sent in /home/rfcables/public_html/product_display.php on line 3
WR-08 SMA Female Waveguide Detector - 90 to 140 GHz

              Mon - 09 Dec 2024                            

Menu

WELCOME TO RFCABLES.ORG
Featured Products
 1.85mm Female End Launch Connector, DC to 67GHz
 1.0mm Straight Female 2 Hole Flange Accepts Pin Connector, DC to 110GHz
 HT LT Cable
 1.0mm Male to 1.0mm Female adapter, DC to 110GHz
 DC-2.1 GHz 2-way Power Divider
 
 
Recently Submitted Products
 Fixed Attenuator, SMA male to SMA female DC to 10GHz, 2watts, stainless steel
 WR-08 SMA Female Waveguide Detector - 90 to 140 GHz
 electronic components
 SSMP Right Angle Female to SMA Waterproof Bulkhead Female for .047 FEP Cable, DC to 18GHz
 1.85mm Female End Launch Connector, DC to 67GHz
 
 
Most Viewed Product
 Fiber Optic Patch Cable FC-FC, Multimode, Duplex 50/125m
 Flexible Cable Assembly
 MULTIFLEX microwave cables
 SUCOFORM, the handformable microwave cable
 Audio and Video Cables
 
 
  Home > Products > RF and Microwave Connectors > Socket/Card Connectors > Others > Speciality
 

WR-08 SMA Female Waveguide Detector - 90 to 140 GHz

View Larger  Image View Larger Image

Product Brief :

The HASCO HWPSD08-90140-S2 is an SMA Female waveguide detector from HASCO. This waveguide detector will operate from 90 GHz to 140 GHz. This detector that can be used for full or narrow band applications. The detector is zero biased and intended for small signal detection purposes. With a distinct circuitry design and careful diode selection, the detector exhibits high sensitivity and extremely flat output characteristics. The detector is designed to have a 10 MHz video bandwidth and a 1 milliohm video output impedance. The minimum detectable signal level is approximately -50 dBm. Waveguide detectors offered by HASCO are square root small signal detectors. What this means is, for RF power in the range of -45 dBm to approximately 0 dBm, the detector output voltage is proportional to its incident power measure in watts. Because of the behavior exhibited, these detectors are also called “square law” detectors. In “linear” operations, the detected voltage output is proportional to the square-root value of the input power. In other words, the power to be detected vs. the output voltage is squared, not linear. 

Product URL :

The above link has been clicked for 15 times
Model :HWPSD08-90140-S2
Product Buying URL :

The above link has been clicked for 15 times

P_234

No comments for this page. Feel free to be the first


Post a comment


Name:
Email:
Subject:
Comment:
characters left

 

Back

Products

 WR-08 SMA Female Waveguide Detector - 90 to 140 GHz
 

Services

 

Articles