Founded in 1985 as Connector Gage Company and later SRI Connector Gage Company, Precision Connector Incorporation (PCI) was established in 2000. It is located in Franklin, Indiana, USA and is a manufacturer of a wide range of precision RF coaxial Connectors.

Products offered by PCI:

• Precision Connectors:

1.0 mm Series/1.85mm Series/2.4mm Series/2.92mm Series/3.5mm Series/ SSMA Series/SMA Series/TNC Series/ N Series  

• Precision Cable Connectors

TNC/SSMA/SMPM/SMA/N/Blindmate/3.5 mm/2.92 mm/2.4 mm/1.85 mm/1.0 mm  

Engineering capabilities:  

• CAD interactive electromagnetic design
• Solid modeling and photo rendering
• Precision support bead design
• Time delay and discontinuity analysis
• Slot and taper compensation analysis
• Compression spring design and analysis
• O-ring and gasket seal design
• Solder engagement analysis
• Snap ring design and analysis
• Crimp termination design

PCI also offers Special Services such as:

• Average power analysis
• Voltage breakdown analysis
• Corona and ionization analysis
• Temperature and altitude derating
• Multipaction analysis and prevention

Precision Connector, Inc. has introduced a new precision Type N connector available for .300 diameter low-loss cables. Using Solder/Clamp cable termination with a soldered center contact, the connector operates in the frequency range from DC to 18GHz. The design has a dielectric loaded solid outer conductor that is compatible with all N female interfaces and has a robust internal captivation. Other features include a convenient knurl/hex coupling nut and an extended tail grip designed to retain SAE-AMS-DTL-23053/4 dual wall heat shrink in hi-flex applications.   Additionally, the connector has moisture resistant front and rear seals and is thermally rated from -55 degrees C to +170 degrees C.