GTT's Product portfolio includes:
-
Module integration
-
RF cables
-
LMR cables
-
Antenna
-
IP67 enclosures
-
RF autoswitches
-
GTT's RF Coaxial Cable assemblies (M2M) - U.FL, SMP or FAKRA:
GTT manufactures RF coaxial cable assemblies for high volume manufacturers
-
LMR100A Coax Cable Assemblies
GTT manufacture a wide range of high performance Low-Loss LMR Coax Cable Assemblies for wireless communication systems and short antenna feed requirements.
Times LMR Series cable provides a UV Resistant Polythene jacketed cable designed for more than 10-year outdoor use. The bending and handling characteristics of LMR cables are significantly better than air-dielectric and corrugated hard-line cables. RF shielding is 50dB greater than single shielded coax (typically 40dB).
Times LMR cables are high performance, flexible, low loss, 50 Ohm coaxial communication cables designed for use in wireless systems.
Times LMR cables can be used virtually anywhere where high performance coaxial cables are needed, including:
-
Internal equipment wiring
-
Inter/Intra cabinet jumpers
-
Base station & antenna jumpers
-
Mobile antennas
Times LMR cables have RF performance comparable to corrugated copper cables, but are highly flexible and offer unsurpassed ease and speed of installation. Compared to RG type braided cables, LMR cables offer far lower loss and better RF shielding. These features make LMR cables the best choice for any wireless application.
Design features of Times LMR cable include:
-
Polyethylene Foam Dielectric
-
Closed cell, low loss
-
High Performance Flexible Shield
-
Aluminum tape bonded to dielectric
-
Provides >90 dB shielding and acts as a 2nd moisture barrier
-
Outer braid (tinned copper); Provides means for grounding and connector retention
-
Polyethylene Outer Jacket
-
Heavy duty, UV & weather resistant, 10+ year life
-
LMR cables have lower loss and far better shielding than comparably sized braided cables.
-
The weather resistance of LMR cable is far superior to braided cables due to their polyethylene jackets, closed cell polyethylene foam dielectric and bonded tape outer conductors.
GTT has partners in France, Germany, Taiwan and China.
GTT Europe is an ISO 9001 and ISO 14001 certified company and its products are RoHS & REACH compliant.